Non Pressure Heat Pipe Evacuated Tube Solar Collectors Double Side For Pool

1000L Double Side Non Pressure Stainless Steel Manifold Vacuum Tube Solar Collector for Pool

Specifications

1) inner manifold: Stainless steel SUS304-2B
2) outer manifold: Color steel or Stainless steel
3) Glass tube dimensions: 47mm x 1.5m x 50 PCS; 58mm x 1.8m x 50 PCS
4) Heat preservation: 72hrs
5) Hail resistance: 25mm

Working Principle of Solar collector

1. The solar collector connect with non-pressurized solar tank.

2. The water pass through solar manifold then into vacuum tube, vacuum tube absorb solar energy, heating the water inside of vacuum tube.

3. According to density difference, the cold water through down into vacuum tube, and hot water flow up into solar manifold, then storage in heat protection water tank.

4. After circulation by temperature circulation pump, all of the cold water will be heated to hot water and storaged in heat protection water tank.

Features of Solar collector

1. The solar collector is more suitable for solar hot water project, because you can free compose many solar collectors for connect with different capacity solar tank, for example, the capacity can do 1000liters, 2000liters, 3000liters, 100000liters, 200000liters and more , normally use in hotel, swimming pool, and others large project

2. The solar collector is separated with non-pressurized solar tank, so it need temperature circulation pump for promote circulation, when the water temperature is difference between storage tank and solar collector, the pump will strat working, cold water will into vacuum tube for heating, and hot water will back to solar tank for storage.

3. The solar collector and solar tank is non-pressurized , so exhaust vent on solar collector and exhaust pipe on solar tank is most important for protection the solar hot water system.

Features of Solar Manifold

1. We have three design for your choose: round type, quadrilateral type and octagonal type

2. Double sides opening for horizontal type solar collector, single side opening for vertical type solar collector

3. The solar manifold can opening from 10tubes to 70tubes for φ47mm/1500mm or φ58mm/1800mm vacuum tube

4. We have many material for your choose: stainless steel, color armor plate, aluminum alloy and galvanized steel.

5. The color armor plate have different color for your choose : white, red, silver gray.

Material of Solar collector

a) Solar manifold: Round type solar manifold, horizontal type solar collector.

Internal: SUS304-2B.

Outer shell: Color steel or SUS304 2B.

b) Frame: Galvanized steel with powder coating.

c) Insulation layer: polyurethane foam.

d) Vacuum tube: high borosilicate glass with AL/N/AL coating.

e) Specification of vacuum tube: φ47mm/1500mm, φ58mm/1800mm vacuum tube.

Technical Data:

Packaging & Shipping

Packaging Details: Export strong corrugated carton.

Delivery Detail: Within 7 - 10 days for container order quantity upon confirmed invoice or sales contract.

JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. is a manufacturer of Solar Water Heater since 1996.

As an experienced company, we can provide the perfect solution for Solar Thermal System.

Our products include solar water heater, solar collector and accessories.
We have advanced technology and equipment, specialized in producing the following solar thermal products:
A. Thermal Solar Water Heater

B. Flat Plate Solar Water Heater

C. Heat Pipe Solar Water Heater

D. Vaccum Tube Solar Water Heater

E. Split Solar Water Heater

F. Pre Heated Solar Water Heater

G. Flat Plate Solar Collector

H. Heat Pipe Solar Collector

I. U Pipe Solar Collector

J. Vacuum Tube Solar Collector

The solar water heater applies to family, underfloor heating, factory, hotel, swimming pool etc.
Survive on quality and seek development with prestige.
Welcome to visit our factory for friendship and business.