Indirect Loop Solar Power Hot Water System , Roof Mounted Solar Water Heater Pipes

200L Balcony Indirect Loop Integrated High Pressure Heat Pipe Solar Water Heater

Working Principle:

The pressurized water tank has no exhaust hole.

therefore, it must bear the pressure came from tap water and hot water.

When use, the hot water comes out because of water pressure.

Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized water tank.

In this case, the water inside the tank becomes hot.

No water in the heat pipe makes the whole system could bear pressure.

Key Specifications:

Inner tank: 1.2mm food grade SUS 304-2B stainless steel

Outer tank: 0.4mm galvanized steel

Evacuated/glass vacuum tube: Al/N/Al-SS-CC, 58 x 1800mm, 10 to 36 pieces

Heat pipe header: red copper

Frame: 1.5mm galvanized steel

Insulating material: 50 to 60mm polyurethane foam

Outer tank diameter: 460mm

Inter tank diameter: 360mm

Capacity: 100/120/140/150/160/180/240/300/360L

Maximum working pressure: 6 bar

Heat preservation: 72 hours

Hail resistance: 25mm

Accessories: magnesium rod, electrical heater and P/T valve

Warranty: 6 years

Additional Information

Accessories:

1. Electric heater:1500W-2000W/220V-230V;

2. Intelligent controller: SR609(esp. for integrative pressurized type);

3. P/T valve (pressure & temperature): WAY-20,0.7MPa;

4. Magnesium rod:diameter 20mm, length 23 cm, copper connector;

5. Temperature sensor;

6. Air vent valve;

7. Vacuum valve;

8. Check valve.

FAQ:

1. What is your Delivery Time?

LCL order:10days.

Full container order:15days.

2. What is your Guarantee Time?

6 years; Provide you with some accessories, they are free for you.

3. Can you accept OEM and ODM ?

YES, printing your LOGO on the product and package, it's free.

4. What is your payment term?

We accept T/T or L/C, Western Union and Paypal.

5. What is your MOQ?

4 sets

6. Low do you pack?

LCL order in plywood case

Full container order in high quality export carton

7. What is your FOB port?

We accept FOB Shanghai, Ningbo, Shenzhen, Guanagzhou, Qingdao etc.

8. What is your monthly production capacity?

1000 sets

9. What is your shipping term?

By sea/Air/Rail/Truck

10. Do you any additional services?

YES!

We offer free spares according to your order quantity. Such as Vacuum Tube, tube holders, dusting rings, silicon rings, screws etc.

And we can offer logo design, Products Advertising Design etc services free.

PDF Catalogue of Integrative Pressurized Solar Water Heater.

PTP-BT Flat Panel Integratived Pressurized Solar W...

JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. is a manufacturer of Solar Water Heater since 1996.

As an experienced company, we can provide the perfect solution for Solar Thermal System.

Our products include solar water heater, solar collector and accessories.
We have advanced technology and equipment, specialized in producing the following solar thermal products:
A. Thermal Solar Water Heater

B. Flat Plate Solar Water Heater

C. Heat Pipe Solar Water Heater

D. Vaccum Tube Solar Water Heater

E. Split Solar Water Heater

F. Pre Heated Solar Water Heater

G. Flat Plate Solar Collector

H. Heat Pipe Solar Collector

I. U Pipe Solar Collector

J. Vacuum Tube Solar Collector

The solar water heater applies to family, underfloor heating, factory, hotel, swimming pool etc.
Survive on quality and seek development with prestige.
Welcome to visit our factory for friendship and business.